Soot, smoke, and structural damage handled by licensed local crews
Commercial Fire Restoration in SAN PEDRO, California
Commercial Fire Restoration in SAN PEDRO, California is what gets your doors back open after a fire, and we handle it from board-up to final walkthrough. We serve offices, retail, restaurants, warehouses, and multi-tenant buildings across San Pedro, California. When your business fire damage restoration SAN PEDRO California job can't wait, we mobilize same-day with the equipment and documentation your insurer needs.
Live phone supportUpfront optionsBacked workmanship
What's included
What Commercial Fire Restoration Includes
Our standard commercial fire restoration scope covers stabilization through rebuild. Some items, like content pack-out or specialty equipment restoration, are quoted separately based on volume. Here's what's typically included when we write your scope.
Emergency Board-Up
We secure windows, doors, and roof openings with plywood and tarps to prevent theft and weather damage. Board-up happens the same day as your call in most cases. It's the first line of defense for your building and inventory.
Soot and Smoke Cleaning
Every affected surface gets HEPA-vacuumed and cleaned with methods matched to the material. Dry-chemical sponges for walls, wet cleaning for hard surfaces, and duct cleaning for HVAC systems. We don't skip cavities or ceilings.
Water Extraction and Drying
Firefighting water gets extracted and structural cavities get dried with air movers and dehumidifiers. We monitor with moisture meters daily and don't pull equipment until readings hit dry standard. This prevents mold growth after fire suppression.
Odor Neutralization
Thermal fogging, hydroxyl generators, and ozone treatment break down smoke molecules in the air and in porous materials. Charcoal and zeolite absorbers handle residual odor in enclosed spaces. The goal is clean air, not a cover-up scent.
Structural Rebuild
Framing, drywall, insulation, roofing, and finish work go back to California Building Standards Code (Title 24). We pull permits and coordinate inspections. The rebuild ends with a walkthrough and a workmanship warranty.
Service overview
Commercial Fire Restoration in SAN PEDRO, California
Commercial Fire Restoration in SAN PEDRO, California is the process of stabilizing a fire-damaged commercial building, removing soot and smoke residue, drying water left by suppression, and rebuilding the structure to code. It covers more than wiping walls. Acidic soot corrodes metal fixtures within hours, smoke pushes through HVAC ducts into untouched rooms, and firefighting water soaks framing and insulation. We scope the whole building, not just the burn room, so nothing gets missed and nothing gets rebuilt twice.
Local businesses here face a specific set of risks. Older wood-frame storefronts along Pacific Avenue and Seventh Street hold odor in plaster and framing cavities, while waterfront buildings near Cabrillo Marina fight salt air on top of smoke residue. We handle SAN PEDRO commercial fire restoration with thermal imaging and moisture readings before we quote, so the scope reflects what's actually wet or contaminated. If you're searching for commercial fire cleanup near me SAN PEDRO, our crews are based here and know the building stock.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
What to Expect During Restoration
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency Board-Up
We secure broken windows, doors, and roof openings within hours of your call, usually same-day. Board-up prevents theft, weather intrusion, and further smoke migration. You get a written inventory of the building's condition at that moment, which becomes the baseline for the insurance file.
Scope and Documentation
A project manager walks the building with a thermal imaging camera and moisture meter, mapping char, soot, and hidden water. We photograph every affected surface and write the scope in Xactimate. This stage takes one to two days on most commercial jobs and gives your adjuster something concrete to approve.
Soot and Smoke Removal
Crews HEPA-vacuum surfaces, then clean with dry-chemical sponges and appropriate detergents. Ductwork gets sealed and cleaned separately so smoke doesn't recirculate. Metal fixtures are treated quickly because acidic soot begins corroding them within 24 to 48 hours. This phase runs three to seven days depending on square footage.
Drying and Deodorization
Firefighting water hides in wall cavities, subfloor, and insulation. We set air movers and dehumidifiers, monitor with moisture meters daily, and run hydroxyl or ozone generators to neutralize odor. Drying typically takes three to five days. We don't pull equipment until readings match dry-standard baselines.
Rebuild and Walkthrough
Framing, drywall, insulation, paint, and finish work go back to code, with permits pulled where required. We schedule inspections and hand over a completed punch list. Most rebuilds finish in two to six weeks depending on scope. You get a final walkthrough and a workmanship warranty on the rebuild.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal Imaging Camera
Finds hidden moisture and hot spots behind walls and ceilings without opening them. It tells us where firefighting water settled and where char is hiding.
HEPA Vacuum
Captures fine soot particles instead of pushing them into the air. Used on every surface before wet cleaning so contamination doesn't spread.
Air Scrubber and Negative Air Machine
Filters airborne particles and creates pressure differentials that keep soot from migrating into clean areas during demolition.
Hydroxyl Generator
Neutralizes smoke odor in occupied or sensitive spaces. Safe to run around electronics and furnishings, unlike ozone in high concentrations.
Ozone Generator
Treats severe odor in unoccupied spaces by oxidizing smoke molecules. Used after cleaning, with the space sealed and cleared before reentry.
Dri-Eaz and Phoenix Dehumidifiers
Pull moisture from structural cavities after firefighting water. We monitor with moisture meters until readings match dry standard.
Dry Ice Blasting Machine
Removes soot and char from framing and masonry without abrasive damage. Useful on older San Pedro buildings where surfaces can't take harsh methods.
Use cases
When to Call for Commercial Fire Restoration
These examples show how the service framework adapts rather than forcing every call through one repair.
Office Suite Smoke Damage
A fire in one suite sent smoke through the shared HVAC system into three neighboring offices. Ceiling tiles, carpet, and furniture in all four suites carried smoke odor, and tenants were threatening to leave. → We sealed and cleaned the ductwork, replaced contaminated ceiling tiles and insulation, and ran hydroxyl generators in all four suites. Three suites were back in service in five days. The burned suite was rebuilt in three weeks.
Warehouse Electrical Fire
An electrical panel fire melted wiring, scorched a wall, and left acidic soot on metal shelving and inventory racks. The warehouse was shut down with shipping deadlines at risk. → We cleaned soot from metal surfaces within 24 hours, documented the electrical damage, and coordinated an electrician. The wall was rebuilt to code in 12 days. The warehouse resumed shipping in five weeks.
Problems we solve
Problems We Solve After a Commercial Fire
Most of the damage we see isn't from the flames. It's from what happens in the hours and days after. Here are the problems that cost SAN PEDRO businesses the most when they're not handled fast.
Lingering smoke odor in ducts and insulation
We seal and clean HVAC ducts, replace contaminated insulation, and run hydroxyl generators until air tests clean. We also use thermal fogging to reach cavities that wiping can't. Odor gets neutralized at the source, not masked.
Acidic soot corroding metal fixtures and electronics
We remove soot fast with dry-chemical sponges and HEPA vacuums, then treat metal surfaces with appropriate cleaners. Electronics get evaluated for ultrasonic cleaning before replacement is recommended. Speed here saves real money on the claim.
Hidden water damage from firefighting
We use thermal imaging cameras and moisture meters to find water before it becomes mold. Air movers and dehumidifiers dry the structure, and we monitor daily. Drying is documented for the insurance file.
Insurance claim documentation gaps
We photograph and measure every affected material and write the scope in Xactimate. The file includes moisture readings, material quantities, and daily logs. Adjusters get what they need to approve the claim.
Pricing process
What Commercial Fire Restoration Costs
$8,000 - $75,000+ depending on scope
Square footage affected
Larger areas need more cleaning, drying equipment, and materials. A 1,000-square-foot office loss costs far less than a 10,000-square-foot warehouse, even with similar damage depth.
Structural damage extent
Charred framing, roof sheathing, and load-bearing walls add rebuild cost. Cosmetic damage that only needs cleaning and paint stays near the low end of the range.
Water from suppression
Firefighting water adds extraction and drying time. Hidden moisture in cavities can add several days of equipment runtime and monitoring to the job.
How much does commercial fire restoration cost in SAN PEDRO California?
Most commercial fire restoration jobs in SAN PEDRO run $8,000 to $75,000, with small office or retail losses near the low end and warehouse or multi-tenant rebuilds at the top. Typical 2026 pricing depends on square footage affected, how much structural framing burned, whether ductwork needs replacement, and how much water suppression left behind. We scope the job in writing before work starts so you know the number up front.
Who does business fire damage restoration near me in SAN PEDRO?
We do, and we're based locally. Our crews handle business fire damage restoration SAN PEDRO California wide, from Downtown San Pedro to Point Fermin and the Harbor Highlands. We're licensed through the CSLB, carry IICRC FSRT certification, and work directly with most major carriers. Call (833) 929-6186 and we'll schedule a walkthrough, usually the same day.
How long does commercial fire restoration take in SAN PEDRO?
Most commercial fire restoration projects take 3 to 8 weeks from board-up to final walkthrough. Small losses with limited structural damage can finish in 2 to 3 weeks. Larger rebuilds with roof or framing damage run 8 to 12 weeks. Drying alone takes 3 to 5 days, and soot removal runs 3 to 7 days, so the schedule depends mostly on how much rebuild is needed.
Does insurance cover commercial fire restoration in SAN PEDRO California?
Yes, most commercial property policies cover fire restoration, including board-up, soot removal, drying, deodorization, and rebuild, up to your policy limits. We document the loss in Xactimate format so your adjuster can process it without back-and-forth. We also track water damage from firefighting separately, since that's often covered under the same claim. Call us and we'll walk your policy with you.
Related services
Related Services
Smoke Damage Restoration
Smoke travels farther than flame, pushing through HVAC ducts and wall cavities into rooms that never burned. We clean and seal those surfaces so odor doesn't return after the rebuild. Most commercial fire jobs in SAN PEDRO need this alongside structural work.
Fire Damage Clean Up
Cleanup covers debris removal, char scraping, and surface cleaning before rebuild starts. We haul out burned materials, HEPA-vacuum soot, and prep surfaces for primer and paint. It's the stage that makes the rebuild possible and keeps contamination from spreading.
Emergency Fire Damage Restoration
Emergency response means board-up, water extraction, and stabilization within hours of your call. We stop further damage before the insurance adjuster arrives. For businesses with inventory or tenant spaces at risk, that first-day response protects the most value.Ready when you are
Get Commercial Fire Restoration in SAN PEDRO, California
One call starts the process: board-up, documentation, and a written scope your insurer can approve. We answer 24/7 and dispatch local crews. Licensed, insured, and IICRC certified.
Talk with the local team
Request Commercial Fire Restoration
Our line is open 24/7, and a live person answers every call. Tell us what burned and whether the structure is secure, and we will give you an arrival window on the spot. We serve every San Pedro neighborhood, from the waterfront to the hills.