
Soot, smoke, and char removed by an IICRC-trained crew
Fire Damage Clean Up in SAN PEDRO, California
Fire Damage Clean Up in SAN PEDRO, California starts with a fast walk-through, a written scope, and a crew that knows how smoke travels through a harbor-district house. We handle soot residue on walls and ceilings, charred framing, and lingering smoke odor, and our fire cleanup services in SAN PEDRO work directly with your insurance adjuster so the claim and the work move together. Call (833) 929-6186.
What's included
What Our Fire Damage Clean Up Includes
Our fire damage clean up covers the work between the fire being put out and the structure being ready to repair or move back into. Here is what is in the standard scope. Structural rebuild, contents packing, and long-term storage are quoted separately, and we tell you which is which before you sign anything.
Emergency Board-Up and Tarp
Broken windows, open doors, and roof damage get boarded and tarped the same day, usually within 2 to 4 hours of arrival. This stops water intrusion and theft while the cleanup scope is finalized.
Debris and Char Removal
Charred drywall, insulation, lumber and framing, and roofing shingles are removed, bagged, and hauled. A typical bedroom fire produces 1 to 3 dumpster loads. We use negative air machines so ash does not spread to clean rooms.
Soot Cleaning on Surfaces
Walls, ceilings, framing, and fixtures are cleaned with HEPA vacuums and dry ice blasting or soda blasting equipment where scrubbing would damage the surface. Soot is acidic, so we neutralize before we seal.
HVAC Duct Cleaning
Smoke-damaged HVAC ducts recontaminate a house every time the system runs. We seal and clean the ducts as part of the standard scope so the odor does not come back the first cold night.
Deodorization and Sealing
Hydroxyl generators, ozone treatment, and thermal fogging solution treat the structure, then an encapsulant sealer or shellac-based primer locks in what is left. Charcoal and zeolite absorbers stay 7 to 14 days.
Insurance Documentation
Every room is photographed and measured, moisture readings are logged, and the scope is built in Xactimate. You get the same file we send your adjuster, so there are no surprises on the claim.
Service overview
What Fire Damage Clean Up in SAN PEDRO, California Involves
Fire Damage Clean Up in SAN PEDRO, California is the physical work of removing soot, char, ash, and smoke residue after a fire is out, then drying and deodorizing the structure so it can be repaired or lived in again. It is not a wipe-down. Soot is acidic and starts corroding metal fixtures, wiring, and appliance finishes within 48 to 72 hours, and smoke pushes into wall cavities, attic insulation, and HVAC ducts where a shop vac cannot reach. We test surfaces with a moisture meter and thermal imaging camera before we decide what gets cleaned and what gets removed.
Most calls we take in SAN PEDRO come from kitchen fires, electrical fires, and attic fires in older homes where lumber and framing are dry and the smoke load is heavy. If you are searching for post fire cleanup near me in SAN PEDRO California at 2 a.m., that is the right instinct: the first 24 hours decide how much of the structure is salvageable. We set negative air machines and HEPA vacuums on arrival to stop soot from migrating into rooms the fire never touched.
The service timeline
How Our Fire Cleanup Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency Response
We answer 24/7 and roll a crew to your SAN PEDRO address, usually within 60 to 90 minutes for emergencies. First job is safety: we check for melted wiring, compromised framing, and gas leaks, then board windows and tarp the roof. You get a walk-through of what we found and what happens next before we move equipment in.
Scope and Documentation
We measure every affected room, take moisture readings, and photograph soot patterns on walls and ceilings. The scope is built in Xactimate with line items your adjuster can audit. Most residential scopes are finished within 24 to 48 hours, and you get a copy of everything we send your carrier.
Dry Debris Removal
Charred drywall, insulation, lumber and framing, and roofing shingles come out first, bagged and hauled. We use HEPA vacuums and negative air machines so ash does not spread to clean rooms. A typical bedroom fire produces 1 to 3 dumpster loads of debris, and this stage usually runs 1 to 2 days.
Deep Clean and Deodorize
Walls, ceilings, and framing get cleaned with dry ice blasting or soda blasting equipment where scrubbing would damage the surface. HVAC ducts are sealed and cleaned so smoke-damaged ducts do not recontaminate the house. Then we run hydroxyl generators and thermal fogging, typically 24 to 72 hours depending on how far the smoke traveled.
Seal, Verify, Hand Back
After surfaces are clean and dry, we apply an encapsulant sealer or a shellac-based primer to lock in any remaining odor. We re-check with a moisture meter and thermal imaging camera, then walk the job with you room by room. If a repair is needed, we hand off to structural repair with the same documentation.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal imaging camera
Finds hidden hot spots and moisture behind walls before we open anything up, so we are not guessing where the damage stops.
HEPA vacuum
Lifts soot and ash without pushing fine particles back into the air. Used on every surface before wet cleaning starts.
Negative air machine and air scrubber
Creates pressure differentials so soot and ash stay in the work zone instead of migrating into clean rooms.
Dry ice blasting machine
Removes soot and char from framing and brick without abrasion or water, which is how we save original lumber.
Hydroxyl generator and ozone generator
Destroys smoke odor at the molecular level. Hydroxyl units run in occupied spaces; ozone is used in unoccupied areas only.
Dehumidifier and air mover
Dries firefighting water to IICRC ASD standards so mold does not start in the 24 to 48 hour window.
Content cleaning ultrasonic machine
Cleans small contents, hardware, and keepsakes that would be ruined by hand scrubbing.
Use cases
When to Call for Fire Damage Clean Up
These examples show how the service framework adapts rather than forcing every call through one repair.

Attic Fire, Point Fermin Bungalow
An attic fire charred 40 percent of the roof framing and pushed smoke down into three bedrooms. The insurance scope initially called for replacing all the framing and the ceiling drywall below. → We removed the charred insulation, used dry ice blasting on the framing, and saved about 70 percent of the original lumber. The bedrooms were treated with thermal fogging and sealed, and the repair scope dropped by roughly $9,000.
Electrical Fire, Barton Hill Fourplex
An electrical fire in one unit melted the panel and sent smoke into the shared attic. The other three units smelled smoke within a day, and the landlord was facing four displaced tenants. → We isolated the circuit, removed the charred material, cleaned the affected unit, and treated the shared attic. The other three units stayed habitable, and the landlord had one documentation file for the carrier.
Problems we solve
Problems We Solve After a Fire in SAN PEDRO
If you are searching for affordable fire damage clean up in SAN PEDRO, California, the real question is which problems need solving first. These are the four we see most often, and what happens if they are left alone.
Lingering smoke odor that returns when the heat runs
We seal and clean the HVAC ducts, run hydroxyl generators and thermal fogging, and leave charcoal and zeolite absorbers for 7 to 14 days. If odor returns within 30 days, we come back and treat it again at no charge.
Soot residue on walls and ceilings that keeps smearing
We test the surface, then use HEPA vacuums and dry ice blasting to lift soot without smearing. Metal fixtures are neutralized before they pit, which saves hardware and wiring terminals you would otherwise replace.
Water damage from firefighting that turns into mold
We dry to IICRC Applied Structural Drying (ASD) standards alongside the fire cleanup, using dehumidifiers and air movers, and we log moisture readings so the dry-down is documented for your adjuster.
Insurance claim documentation gaps that shrink the payout
We photograph and measure every affected room, log moisture readings, and build the scope in Xactimate before work starts. You get the same file we send your carrier, so the claim matches the work.
Pricing process
What Fire Damage Clean Up Costs
$3,000 - $12,000 for most residential jobs, higher for commercial and heavy smoke spread
Size of the affected area
A single room costs less than a whole floor. Smoke travels, so the cleaning area is usually larger than the burn area, and that is the number that drives the scope.
Soot and char depth
Light soot on drywall cleans up in a day. Charred framing and melted wiring mean removal and rebuild, which adds labor, disposal, and materials.
Odor severity and spread
Smoke that reached the HVAC ducts or the attic takes longer to treat. Hydroxyl and ozone treatment runs 24 to 72 hours, and that time is part of the cost.
How much does fire damage clean up cost in SAN PEDRO California?
Most residential fire damage clean up in SAN PEDRO, California runs $3,000 to $12,000, with small contained fires at the low end and whole-room or attic fires at the high end. Commercial jobs and homes with heavy smoke spread go higher. We give you a written scope before work starts, and we bill insurance directly when the claim covers the work.
Who offers fire cleanup services near me in SAN PEDRO?
We do, and we answer the phone 24/7 at (833) 929-6186. Our fire cleanup services in SAN PEDRO cover soot removal, debris hauling, deodorization, and board-up, and we work the whole harbor area from Downtown San Pedro to Point Fermin. A crew lead walks your property with you before anything is moved.
What does fire damage clean up include in SAN PEDRO?
It includes board-up, debris removal, soot and char cleaning, HVAC duct cleaning, deodorization with hydroxyl or ozone treatment, and a final seal. We also document everything for your insurance claim. Structural repair like new drywall or framing is a separate stage, and we scope it clearly so you know what is cleanup and what is rebuild.
Does insurance pay for fire cleanup in SAN PEDRO?
Yes, most homeowner and commercial policies cover fire cleanup as part of the dwelling and personal property claim, and we bill carriers directly. We build the scope in Xactimate, photograph every affected room, and send the file to your adjuster. You are responsible for your deductible, and we tell you upfront what that means for your out-of-pocket.
Ready when you are
Need Fire Damage Clean Up in SAN PEDRO, California?
We answer 24/7, roll a crew within 60 to 90 minutes for emergencies, and give you a written scope before work starts. Licensed, bonded, and IICRC-trained. Call now and we will walk your property with you.

Talk with the local team
Request Fire Damage Clean Up
Our line is open 24/7, and a live person answers every call. Tell us what burned and whether the structure is secure, and we will give you an arrival window on the spot. We serve every San Pedro neighborhood, from the waterfront to the hills.



