Soot, smoke, and charred wiring handled by licensed fire restoration techs
Electrical Fire Cleanup in SAN PEDRO, California
Electrical Fire Cleanup in SAN PEDRO, California starts with stopping the damage from spreading: acidic soot eats metal, smoke odor settles into drywall, and melted wiring leaves a hazard behind. We handle residential electrical fire restoration and commercial electrical fire cleanup across San Pedro, from Point Fermin bungalows to Seventh Street storefronts. Call (833) 929-6186 and we roll a crew with thermal imaging and HEPA extraction the same day.
Live phone supportUpfront optionsBacked workmanship
What's included
What Electrical Fire Cleanup Includes
Every job includes the safety inspection, soot and char removal, odor treatment, and insurance documentation. Rebuild work like new drywall, paint, and finish carpentry is quoted separately so you can see exactly what the cleanup costs before the repair begins.
Thermal and Moisture Inspection
We scan walls and ceilings with a thermal imaging camera to find hidden hot spots and use a moisture meter to map water from firefighting. This is the step that tells us how far the damage actually reaches before we open anything up.
Soot and Char Removal
HEPA vacuuming, dry ice blasting, and soda blasting remove soot and char from framing, drywall, and metal without gouging the surface. Every cleaned surface gets a shellac-based primer or encapsulant sealer to lock in residue.
Odor and Duct Treatment
Hydroxyl generators, thermal fogging solution, and charcoal and zeolite odor absorbers pull smoke out of the air and materials. Smoke-damaged HVAC ducts are cleaned and sealed with duct sealant so odor does not recirculate.
Contents Cleaning
Smoke-stained furniture, clothing, and electronics go through HEPA vacuuming and an ultrasonic machine where appropriate. We inventory everything we take off site and return it cleaned, so you are not replacing items that could have been saved.
Insurance Documentation
Photos, moisture logs, and an itemized Xactimate scope go into a file your adjuster can approve. We can bill the carrier directly and keep you updated on what is covered and what is not.
Service overview
What Electrical Fire Cleanup in SAN PEDRO, California Involves
Electrical Fire Cleanup in SAN PEDRO, California is the specialized removal of soot, char, smoke residue, and compromised wiring left behind after a short, arc, or panel failure. It is not the same as general house cleaning. The residue from burning insulation and plastic is acidic and conductive; left on drywall, copper, or circuit boards, it keeps corroding for weeks. Our crews use a thermal imaging camera to find hot spots inside walls, a moisture meter to catch water from firefighting, and HEPA vacuums with air scrubbers to pull fine carbon out of the air before it re-settles.
Most calls we take in San Pedro start the same way: a breaker that kept tripping, a burning smell at an outlet, then a pop and a scorch mark up the wall. Older housing stock near Barton Hill and Rancho San Pedro often still runs two-prong outlets and undersized panels, which is exactly where wiring and panel fire cleanup SAN PEDRO California work begins. If you are searching for electrical fire cleanup near me in SAN PEDRO California at 2 a.m., we answer the phone and dispatch.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
How Our Electrical Fire Cleanup Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency Response
We take your call 24/7 and arrive with the power already isolated by your electrician or ours. The first 30 minutes are about safety: checking for hidden heat with a thermal imaging camera, confirming the fire is fully out, and boarding or tarping any opening. You get a written scope and a start time before we touch a wall.
Containment and Dry-Out
Negative air machines and air scrubbers go up to keep soot from migrating into clean rooms. If firefighting water soaked insulation or framing, dehumidifiers and air movers run until moisture meter readings match dry standard, usually 2 to 4 days. Skipping this step is how mold growth after fire suppression starts.
Soot and Char Removal
Crews HEPA-vacuum ceilings and walls first, then dry ice blast or soda blast charred framing where sanding would gouge the wood. Melted wiring and electrical damage are cut back to clean copper. Every surface gets a shellac-based primer or encapsulant sealer so residue cannot bleed back through new paint.
Odor and Duct Treatment
Smoke-damaged HVAC ducts are cleaned and sealed with duct sealant, then the whole structure is treated with hydroxyl radicals or ozone treatment depending on occupancy. Soft goods go through an ultrasonic machine. This stage typically runs 1 to 3 days and is what makes the house smell like a house again.
Clearance and Rebuild
We walk the job with you, take post-cleanup photos for the claim file, and hand off to structural repair for drywall, insulation, lumber and framing, and paint. Most electrical fire cleanups in San Pedro reach clearance in 5 to 10 working days, with rebuild scheduled right behind it.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal imaging camera
Finds hidden hot spots inside walls and ceilings after an electrical fire, so we open the right cavities instead of guessing.
HEPA vacuum and air scrubber
Captures fine carbon and soot particles before they settle back onto clean surfaces or spread into unaffected rooms.
Dry ice blasting machine
Removes char from framing and lumber without the gouging that sanding causes, which saves structural members from replacement.
Hydroxyl generator and ozone generator
Neutralizes smoke odor at the molecular level. Hydroxyl units are safe for occupied spaces; ozone is used only in unoccupied areas.
Dehumidifier and air mover
Dries framing and insulation soaked by firefighting water before mold growth after fire suppression can start.
Moisture meter
Logs daily readings so we know when the structure has reached dry standard and the dry-out can stop.
Content cleaning ultrasonic machine
Pulls smoke residue out of hard contents, jewelry, and small electronics that surface cleaning cannot reach.
Use cases
When to Call for Electrical Fire Cleanup
These examples show how the service framework adapts rather than forcing every call through one repair.
Panel Fire in a Seventh Street Storefront
A panel failure filled a retail shop with smoke during business hours. The main tripped, the shop closed, and soot settled on merchandise and shelving. The owner was worried about losing the week's revenue. → We contained the smoke, cleaned and sealed the ductwork, treated the sales floor with hydroxyl generators overnight, and documented the loss in Xactimate. The panel was replaced by a licensed electrician, and the shop reopened the next morning.
Attic Wiring Fire in Harbor Highlands
An attic wiring fault burned insulation and charred two framing members above the garage. The homeowner noticed a smoke smell in the hallway and called after the fire was out. Ductwork had pulled smoke into the living space. → Crews removed burned insulation, dry ice blasted the charred framing, cleaned and sealed the ducts, and re-insulated to Title 24. Moisture readings confirmed the framing was dry. The attic passed inspection, and the odor cleared in three days.
Problems we solve
Problems Electrical Fire Cleanup in SAN PEDRO, California Solves
An electrical fire rarely destroys a whole house. It leaves a trail of small, expensive problems that get worse if nobody treats them in order. Here are the ones we see most often in San Pedro.
Lingering smoke odor that returns with humidity
We treat the source, not the air. Hydroxyl generators run for 24 to 72 hours, thermal fogging reaches cavities, and soft goods go through an ultrasonic machine. Most homes pass a smell test within three days of treatment.
Acidic soot corroding outlets, fixtures, and appliances
Our crews neutralize and remove soot from every exposed surface within the first visit, then seal with an oil-based stain-blocking primer. We document what was saved and what needs replacement for your claim.
Melted wiring and electrical damage left hidden in walls
We isolate and test circuits, cut back damaged conductors, and coordinate a licensed electrician for repair. Power is not restored until the panel and affected circuits pass inspection.
Water damage and mold after firefighting
Dehumidifiers and air movers run until moisture meter readings hit dry standard, usually 2 to 4 days. We log readings daily so your adjuster sees the dry-out was done correctly.
Pricing process
Electrical Fire Cleanup Pricing in SAN PEDRO
$1,800 - $9,500 depending on scope
Square footage affected
Soot and smoke travel further than most people expect. A single room may need only surface cleaning, while a fire that reached the attic or ductwork can add several rooms and a full HVAC cleaning to the scope.
Water from firefighting
If hoses soaked insulation or framing, drying equipment runs for 2 to 4 days and adds moisture logging. Skipping it risks mold growth after fire suppression, which costs more than the dry-out.
Wiring and panel damage
Melted wiring and electrical damage require an electrician to isolate, replace, and test circuits before power returns. The more circuits involved, the longer the electrical portion of the job.
How much does electrical fire cleanup cost in SAN PEDRO California?
Most electrical fire cleanup jobs in San Pedro run $1,800 to $9,500 in 2026, with a single-room outlet fire at the low end and a panel fire with duct and structural damage at the high end. Cost depends on square footage affected, whether firefighting water soaked the framing, and how much contents cleaning is needed. We give you a written scope before work starts, and we bill insurance directly when the claim covers it.
Who does electrical fire damage restoration near me in SAN PEDRO?
We do. Fire Damage Restoration San Pedro handles electrical fire damage restoration SAN PEDRO California wide, from Point Fermin to Harbor Highlands, with IICRC-certified technicians and CSLB-licensed crews. Call (833) 929-6186 and we will confirm a same-day or next-morning window, bring thermal imaging and HEPA equipment, and give you a written scope on site.
Can electrical wiring be reused after a fire in SAN PEDRO?
Usually not. Any conductor that shows char, melted insulation, or soot intrusion at the box is cut back and replaced, because heat damage travels further than the visible scorch. Copper that tests clean and passes insulation resistance can stay. A licensed electrician makes that call, and we coordinate it before the panel is re-energized so the repair meets code.
Does insurance cover electrical fire cleanup in SAN PEDRO?
Yes, in most cases. A standard homeowners or commercial policy covers cleanup, contents, and rebuild after an accidental electrical fire, and we document the loss in Xactimate so your adjuster has line items to approve. We photograph every affected room, log moisture readings, and provide a scope you can submit the same day. Coverage limits and deductibles still apply, so confirm those with your carrier.
Related services
Related Services
Smoke Damage Restoration
Electrical fires push fine, oily smoke through every gap in a house. We seal affected rooms, run air scrubbers, and treat surfaces so smoke residue does not re-odor the home weeks later.
Fire Damage Clean Up
When the electrical fire spreads past the panel, full fire damage clean up covers debris removal, char removal, and safe disposal of burned materials before restoration begins.
Emergency Fire Damage Restoration
Our 24/7 line handles emergency fire damage restoration when the fire is out but the structure is still vulnerable. We board openings, stop water damage, and stabilize the site the same night.Ready when you are
Get Electrical Fire Cleanup in SAN PEDRO, California Today
Soot does its worst damage in the first 72 hours. Call (833) 929-6186 for same-day Electrical Fire Cleanup in SAN PEDRO, California, with a written scope, insurance documentation, and a crew that has done this before. Licensed, insured, and answering 24/7.
Talk with the local team
Request Electrical Fire Cleanup
Our line is open 24/7, and a live person answers every call. Tell us what burned and whether the structure is secure, and we will give you an arrival window on the spot. We serve every San Pedro neighborhood, from the waterfront to the hills.