Soot, odor, and char removed by IICRC-certified crews, 24/7
Fire and Smoke Damage Restoration in SAN PEDRO, California
Fire and Smoke Damage Restoration in SAN PEDRO, California starts with a 60-minute emergency response, not a phone tree. We board broken openings, pull standing firefighting water, and start soot removal before acidic residue etches your walls and metal fixtures. Whether you own a bungalow near Point Fermin or manage a commercial kitchen at Ports O' Call, our fire and smoke damage repair in SAN PEDRO California crews document every inch for your insurance claim and rebuild what the fire took.
Live phone supportUpfront optionsBacked workmanship
What's included
What Fire and Smoke Damage Restoration Includes
Our standard scope covers stabilization, cleaning, odor neutralization, and the rebuild of fire-damaged materials. Contents pack-out, specialty stone restoration, and full electrical rewire are quoted as separate line items once we have walked the property, so you see the whole number before we start.
Emergency Board-Up and Tarp
Broken windows and boarded openings secured with plywood, roof openings tarped, and a walkthrough of safe versus off-limits areas so you know exactly what you can enter.
Water Extraction and Structural Drying
Firefighting water removed with truck-mounted extractors, then Dri-Eaz dehumidifiers and air movers run until moisture meter readings hit dry standard in walls, floors, and crawlspaces.
Soot and Residue Cleaning
HEPA vacuuming, chemical sponging, and dry ice blasting on walls, ceilings, framing, and fixtures. We match the cleaning agent to the residue type so protein smoke and wet smoke get different treatment.
Odor Neutralization and Duct Cleaning
Hydroxyl generators, thermal fogging, and charcoal or zeolite odor absorbers placed where air stagnates. Ductwork is sealed and cleaned so smoke-damaged HVAC ducts stop pushing odor back into clean rooms.
Contents Cleaning and Pack-Out
Smoke-stained furniture and upholstery, dishes, tools, and electronics cleaned in our ultrasonic machine or by hand. Items we cannot save are documented for your claim rather than quietly discarded.
Rebuild With Stain-Blocking Primer
Drywall, insulation, lumber and framing, roofing shingles, and siding replaced to code, then sealed with shellac-based or oil-based stain-blocking primer and an encapsulant sealer so smoke stains cannot bleed through the finish coat.
Service overview
What Fire and Smoke Damage Restoration in SAN PEDRO, California Involves
Fire and Smoke Damage Restoration in SAN PEDRO, California is the structured process of stabilizing a burned structure, removing soot and smoke residue, neutralizing odor at the molecular level, and rebuilding damaged framing, drywall, and finishes. It is not cleaning. Soot from a kitchen fire is acidic and begins corroding metal within 48 to 72 hours; smoke pushed through HVAC ducts deposits residue in every room of the house. Our crews use thermal imaging cameras and moisture meters to find hidden char and firefighting water, then HEPA vacuums and air scrubbers to capture particles instead of spreading them.
In SAN PEDRO, the calls we take most are kitchen grease fires in older Seventh Street bungalows, attic fires in Rancho San Pedro housing, and electrical fires in the dense multifamily buildings around Pacific Avenue. Salt air from the harbor accelerates corrosion on smoke-exposed metal, so we treat soot residue on railings, appliances, and window frames as an urgent item, not a cosmetic one. If you are searching for fire and smoke cleanup near me SAN PEDRO, the first 24 hours decide how much of your structure can be saved rather than replaced.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
Our Fire and Smoke Restoration Process
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency Board-Up
We arrive within 60 minutes for emergency calls, secure broken windows and doors with plywood, and tarp roof openings so weather and theft cannot add to the loss. You get a walkthrough of what is safe to enter and what stays off-limits until structural framing is checked.
Water Extraction and Drying
Firefighting water comes out first. Truck-mounted extractors pull standing water from flooring and carpet, then we set air movers and dehumidifiers and monitor moisture readings daily until structural cavities hit dry standard. Skipping this step is how a fire loss turns into a mold loss.
Soot and Smoke Removal
Crews HEPA-vacuum ceilings and walls, then clean surfaces with the right agent for the residue type, since protein smoke from grease fires and wet smoke from smoldering lumber behave differently. Sensitive electronics and contents go to ultrasonic cleaning; ductwork gets sealed and cleaned so smoke-damaged HVAC ducts stop recontaminating rooms.
Odor Neutralization
After surfaces are clean, we place hydroxyl generators or run thermal fogging with a solution matched to the odor source, typically for 24 to 72 hours depending on square footage and how long the smoke sat. Charcoal and zeolite absorbers stay in closets and cabinets where air circulation is poor.
Rebuild and Final Walk
We replace drywall, insulation, lumber and framing, roofing shingles, and siding as needed, prime with shellac-based or oil-based stain-blocking primer so smoke stains cannot bleed through paint, and finish with an encapsulant sealer. The final walk covers every room with you and closes out the documentation package for your carrier.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal imaging camera
Finds hidden char behind walls and residual heat pockets before crews open a cavity, so we are not guessing where the fire traveled.
HEPA vacuum and air scrubber
Captures fine soot particles instead of pushing them into the air. Paired with a negative air machine, it keeps clean rooms clean during demolition.
Dry ice blasting machine
Lifts soot from framing, brick, and metal without abrasion or water, which is how charred studs get cleaned instead of replaced when the wood is still sound.
Hydroxyl generator and ozone generator
Neutralizes odor at the molecular level. Hydroxyl units run safely in occupied-adjacent spaces; ozone treatment is used in sealed, unoccupied rooms.
Dri-Eaz dehumidifier and air mover
Dries firefighting water out of flooring and structural cavities to IICRC Applied Structural Drying standards, monitored with moisture meter readings daily.
Content cleaning ultrasonic machine
Cleans smoke residue from hard contents, small electronics, and intricate items that hand cleaning cannot reach without damage.
Soda blasting equipment
Removes heavy char and smoke staining from masonry and heavy timber where gentler methods would leave residue behind.
Use cases
When to Call for Fire and Smoke Restoration
These examples show how the service framework adapts rather than forcing every call through one repair.
Attic Fire Rebuild, Rancho San Pedro
An attic fire charred six rafters and burned through insulation over a bedroom. Firefighting water ran down the interior walls and pooled in the ceiling cavity, and smoke pushed into two adjacent rooms through the ductwork. → Burned lumber and insulation removed, rafters cleaned and sealed, decking and roofing shingles rebuilt, and ductwork cleaned and sealed. Moisture readings returned to dry standard in four days, and both rooms cleared for occupancy after odor treatment.
Restaurant Fire, Ports O' Call
An electrical fire behind the cook line melted wiring and coated the hood and duct run in soot. The dining room smelled of smoke, and the owner had already priced replacement for the stainless prep tables. → Melted wiring isolated for licensed repair, hood and ducts cleaned, and dry ice blasting restored the stainless prep tables instead of replacing them. The kitchen passed inspection and reopened in eleven days.
Problems we solve
Problems We Solve After a Fire
Most fire losses we see in SAN PEDRO have a second problem riding along with the first: water, odor, mold, or a claim that stalls. Here is how we handle each.
Lingering smoke odor that returns after cleaning
We find the source with thermal imaging and air sampling logic, then treat with hydroxyl generators, ozone treatment, or thermal fogging matched to the residue. Charcoal and zeolite absorbers stay in enclosed spaces until readings clear.
Soot residue on walls and ceilings
Dry removal first: HEPA vacuum, then chemical sponges, then dry ice blasting on stubborn areas. We seal what remains with shellac-based primer before any paint goes on.
Water damage from firefighting
Extraction and drying start the same visit. We monitor moisture meter readings daily and dry to IICRC Applied Structural Drying standards, documenting the dry-down for your carrier.
Insurance claim documentation gaps
Every affected material is photographed, measured, and priced in Xactimate. You get a copy of the same scope we send your carrier, so nothing on the list is a surprise.
Pricing process
What Fire and Smoke Restoration Costs
$3,500 - $18,000 depending on scope
Square footage affected
A single room with contained smoke is a different job than smoke pushed through a whole house by HVAC. Every additional room adds cleaning, sealing, and odor treatment time.
Residue type
Protein smoke from grease fires, wet smoke from smoldering lumber, and dry smoke from fast-burning material each need different cleaning agents and different amounts of labor.
Structural damage extent
Cleaning charred framing costs less than replacing it. When lumber and framing have lost section, the rebuild scope grows and so does the total.
How much does fire and smoke damage restoration cost in SAN PEDRO California?
Most residential jobs run $3,500 to $18,000 in 2026, with whole-house losses and commercial rebuilds going higher. A single-room kitchen fire with odor treatment usually lands near the low end; attic fires with charred framing and water damage land higher. We scope in Xactimate so you see line items before work starts, and we bill carriers directly when you file a claim.
Who does fire and smoke damage repair near me in SAN PEDRO?
We do, and we handle both the mitigation and the rebuild. That means the same company that boards your windows and removes soot also replaces drywall, insulation, lumber and framing, and roofing shingles. Call (833) 929-6186 and a technician, not a dispatcher reading a script, will walk your rooms with you and explain what can be cleaned versus what has to come out.
Can smoke damage be removed without replacing materials in SAN PEDRO?
Often yes. Painted drywall, tile, metal fixtures, cabinets, and hard flooring frequently clean up with HEPA vacuuming, chemical sponges, and dry ice blasting. Porous materials absorb smoke deeper: insulation, carpet padding, and ceiling texture usually get replaced. We test surfaces first and tell you plainly which category each room falls into before we quote the work.
Does insurance cover fire and smoke damage restoration in SAN PEDRO?
Most homeowner and commercial property policies cover fire and smoke damage restoration, including water damage from firefighting, with coverage limits set by your policy. We photograph and measure every affected material, price it in Xactimate, and submit the documentation package your adjuster needs. You pay your deductible; we work the rest of the claim with your carrier so nothing gets missed.
Related services
Related Services
Smoke Damage Restoration
When the fire is out but the smell and staining remain, smoke and soot restoration SAN PEDRO California crews clean surfaces, seal porous materials, and neutralize odor so the house smells like a house again.
Fire Damage Clean Up
Debris removal, char scraping, and haul-away for SAN PEDRO properties. We clear burned contents and structural waste so the rebuild can start on a clean, inspected shell instead of a pile of ash.
Emergency Fire Damage Restoration
Board-up, tarp-over, and water extraction within 60 minutes for SAN PEDRO calls. This is the first-response service that stops secondary damage while your claim and rebuild scope are being sorted out.Ready when you are
Get Fire and Smoke Damage Restoration in SAN PEDRO, California
Soot keeps working while you wait. Call (833) 929-6186 and we will board up, extract water, and start documentation the same day. Licensed, insured, and scoped in Xactimate so your claim holds up.
Talk with the local team
Request Fire and Smoke Damage Restoration
Our line is open 24/7, and a live person answers every call. Tell us what burned and whether the structure is secure, and we will give you an arrival window on the spot. We serve every San Pedro neighborhood, from the waterfront to the hills.